DPP-300 Truck Mounted Drilling Rigs with Torque 3500N.m
1. There are more speed grade (8 grades), reasonable speed range,
with low speed but high torque.
2. The rig is adapted for core drilling with carbide and diamond
bit, It is also suitable for engineering geological exploration,
well drilling,blast hole, exploring gas and basic pile foundation
3. By using hydraulic chuck, It is in strong and steady clamping
force. By using the hydraulic fed, the drilling rig can move back
4. It is convenient for you to treat trouble with two reverse
5. It is compact in construction, rational in overall
arrangement,moderate in weight, convenient in assembling and wide
in range of rotation speed.
|Hole depth(core drilling)||600m||Rod dia||42mm|
|Hole depth(core drilling)||360m||Rod dia||50mm|
|Hole depth(core drilling)||300m||Rod dia||60mm|
|Hole depth(wire-line drill rod)||430m||Rod dia||BQ|
|Hole depth(wire-line drill rod)||330m||Rod dia||NQ|
|Spindle speed||Forward speed:57-1017r/min|
|Stroke of spindle||600mm|
|Max .lifting capacity||80KN|
|Max.torque of spindle||3500N.m|
|Max .feeding capacity||60KN|
|Main winch||Steel Wire Cable Dia||16 mm|
Max .lifting capacity
|Lifting speed(the third layer):||0.42-1.61m/s|
|Oil Pump||Type: single pump|
|Backward Stroke||350 mm|
|Weight (less engine)||11090|
1. Core drilling with carbide and diamond bit .
2. Engineering geological exploration.
3. Well drilling.
4. Basic pile foundation engineering.
5. Blast hole, exploring gas.
Jiangsu Wuxi Mineral Exploration Machinery Factor which was founded
in 1956.it has developed core-drill machine, geologic exploration
drilling rig, anchoring drill rig,jet-grouting drill rig and so on.
At present, the products has been exported to Southeast Africa,
Asia and other global markets.